Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13555874

- Product Categories
- Friendly Links
Information Name: | Dust bag material, nine are brightly lit (certified), dust bag |
Published: | 2015-03-11 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Dust bag is made of two or more kinds of high temperature resistant fibers blended and layered composites, in order to achieve higher and new physical and chemical properties. High temperature, high strength, resistance to acid corrosion, abrasion, bending, etc., after different surface finishing techniques and chemical treatment, but also has easy cleaning, water repellent oil, anti-static characteristics dust bag for 200 ° C-300 ° C series. Compared with glass fiber dust bag bag, wear resistance, flexural resistance and peel strength significantly improved, affordable high filtration load. Filtration rate of up to 1.0m / min or more, low running resistance. Compared with the high-temperature synthetic fiber filter, overcome fiber filter elongation, deformation, low temperature, poor corrosion resistance of weakness; and better products dimensional stability, strength, and the price is lower than other high-temperature chemistry fibers. Dust bag manufacture Note: the lower part of the bag is too long will cause the bag to wear, especially within the bag bottom-up 100 mm, mainly dust bag bag cage length 30 mm longer than the above types of dust bag, bag filter shrink when too large bag bag bottom-up 100 mm, and the bag at the bottom of the cage friction will happen eventually wear bag. More signs of breakage grounds inside out, broken in the lower part of the bag folds. Relation to the bag bag spring ring seal, bearing and other important aspects, the spring plate fracture occurred in the dust bag improper storage corrosion or oxidation of the spring leaf spring steel sheet is too hard too brittle coating dust bag manufacturers, the former belongs to the customer reason fluorine US Adams dust bag factory, which belongs to the supplier reasons. Spring pieces too soft bag that does not affect the installation is no problem, if you can not install the need to replace the supplier. Most sewing fracture is caused by wear and tear, fracture surface has obvious signs of wear. Sewing thread and bag materials have different causes, but the probability of this happening is very low, leaving it crushed, broken or breaking strength decreased. Dust bag material, nine are brightly lit (certified), dust bag provided by Botou brightly lit dust Equipment Limited. Botou brightly lit dust Equipment Co., Ltd. (www.bttm.cn) Hebei Cangzhou, a leader in environmentally friendly products processing, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In the brightly lit dust leadership with the staff warmly welcome all inquiries negotiations to create a better future for brightly lit dust. |
Admin>>>
You are the 42343 visitor
Copyright © GuangDong ICP No. 10089450, Botou brightly lit dust Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 42343 visitor
Copyright © GuangDong ICP No. 10089450, Botou brightly lit dust Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility