Nine are brightly lit pulse controller on a regular cleaning, pressure cleaning, gas tank and other forms offline. Timing dust control is chronologically artificial automatic control cleaning agencies working state, are loop control. Pulse controller is based on the deposition of dust bag wall thickness variations caused by changes in the value of the baghouse pressure drop Han was the implementation of automatic cleaning pulse control device, the pressure is higher than the upper limit start cleaning, below the lower limit Stop cleaning. You can also require the use of a combination of two control modes based on the actual site. 1, the output of non-Weld joints and poor contact. Often due to poor contact spark generated interference will affect the normal operation of the entire circuit. Requires attention. 2, single output common line can provide stand-alone use, multi-machine use stand-alone single output section should take, must not interconnected. 3,20 door, 14 control device independent output common line terminal or an other color line pulse controller, the solenoid valve 20 output plug one end and the other end connected to the public online. Remaining within the controller 20 outputs a common line, usually the last row, wire color is different, please note that when installing. 4, can not be greater than 0.75A fuse burned when replacing, 0.5A best, non-oil instead of wires or other conductive material power input. FireWire and the zero line should access 0.5A, 0.75A fuse to ensure the safe use of the instrument. 5, the controller starts the solenoid valve, solenoid valve and connecting wires short circuit, leakage phenomenon should not occur, so always check. In the current industrial production, mostly using a programmable control system, but due to the impact of poor working environment, impulse control instrument control system should regularly do routine maintenance work. Specific maintenance is as follows: First, the regular maintenance pulse controller, every six months, a significant number of impulse control device, if the pulse controller working environment is very poor impulse control non-contact device that can be adjusted according to the actual situation. Once a month, and so on. Second, check the external environment, such as ambient temperature is within the range specified in the standard, dust Check if there is dust serious phenomenon. Third, periodically check the fuse lithium batteries and other power supply system, to see if the power supply voltage variation is within the standard range. Fourth, the regular replacement of impulse control instrument components and check components for damage. Before replacing the programmable control to ensure that the contents are preserved, ensuring that information is not saved or lost information phenomenon, need to give the pulse controller charging. Then disconnect the power, remove the old battery replacement battery. Replacement will not take too long. Fifth, regularly check pulse controller input and output supply outside the measured voltage is within the standard range. Sixth, the various parts of the regular inspection pulse control device installation and reliable, if there is loosening, the connection is secure contact with the various parts of the screw has no loosening. Han was the pulse controller, nine are brightly lit brand (certified), impulse control instrument provided by Botou brightly lit dust Equipment Co. Botou brightly lit dust Equipment Co., Ltd. (www.bttm.cn) (http://m.bttmcc.com) Hebei Cangzhou, a leader in environmentally friendly products processing, over the years, the company is implementing the scientific management, innovation and development, honesty and trustworthiness guidelines, and satisfy customer needs. In the brightly lit dust leadership with the staff warmly welcome all inquiries negotiations to create a better future for brightly lit dust. You can also access (http://m.bttmcc.com/supply_details_41159582.html), for more information about the company.