Nine are brightly lit | Hubei electromagnetic pulse valve | electromagnetic pulse valve provided by the brightly lit dust. We are Botou brightly lit dust Equipment Co. (www.tmccsb.com) located at: Hebei Cangzhou specializes in: bag filters, electrostatic precipitators, bag filter accessories, electrostatic precipitator parts electromagnetic pulse valve inspection and classification: 1 products in the factory valve must be individually tested 2,3,4,9 technical requirements specified terms. 2, quarterly random sampling of manufactured products 15% (less than 10), according to the terms of the technical requirements specified 5,8 inspection. When one of the following types of test cases, type of inspection should be carried out: a) the first production of the product; b) the production process and the use of material changes; c) mass production of valve should be conducted every three years; d) the national quality supervision proposed structure type test requirements. Electromagnetic pulse valve in the use of the material often leak problems occur due to electromagnetic pulse Guizhou unloader valve bearing, this is because the impeller unloader wall junction gap is too large, easy to leak when unloading materials. This wheel set on the pad Hubei electromagnetic pulse valve, when the upper silo filling material falling by gravity in the space between the blades in Yunnan electromagnetic pulse valve, with the rotating blades discharged from the upper part of the electromagnetic pulse valve, which is unloader works to solve the leakage problem material. Unloader wall friction in the shell will always discharge frayed, unloader is all kinds of dust removal equipment ash process is very important part, causing leakage of material.